Parts

No parts required.

  1. Locate a small opening around the front panel of the camera.
    • Locate a small opening around the front panel of the camera.

    Add Comment

  2. Using a plastic opening tool, apply pressure to various points around the camera to pry open the front panel.
    • Using a plastic opening tool, apply pressure to various points around the camera to pry open the front panel.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove both of the connecting wires from the motherboard.

    • Be careful to not bend headers or damage the wires.

    Add Comment

    • Apply a plastic opening tool to the gray plastic band around the case of the camera. Insert the edge of the spudger between the case of the camera and the gray plastic band.

    Add Comment

    • Apply pressure with the plastic opening tool to various areas of the gray plastic band to pry it from the white plastic back of the case.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 9

All Time: 226