Introduction

This guide provides steps on how to properly replace the strap hook.

Parts

No parts required.

Locate the two 3.5 mm screws on the side of the device. Apply pressure to the PH J000 philips head screwdriver and turn in a counter clockwise motion until the screw becomes loose enough to pull out. Apply pressure to the PH J000 philips head screwdriver and turn in a counter clockwise motion until the screw becomes loose enough to pull out.
  • Locate the two 3.5 mm screws on the side of the device.

  • Apply pressure to the PH J000 philips head screwdriver and turn in a counter clockwise motion until the screw becomes loose enough to pull out.

Add Comment

Deck the Halls
With tools and Fix Kits
Conclusion

To reassemble your device, follow these instructions in reverse order.

Cheyenne Heinen

Member since: 03/07/2016

322 Reputation

3 Guides authored

Team

Marist, Team 1-3, Laflen Spring 2016 Member of Marist, Team 1-3, Laflen Spring 2016

MARS-LAFLEN-S16S1G3

2 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 66