Ryobi RJ1861V Trigger Assembly Replacement Guide
Enrique Huet and one other contributor
Last updated on Jun 21, 2022
Views: 577
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 18
- Past 30 Days:
- 55
- All Time:
- 577
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓This guide is to be able to access the Trigger Assembly if needed to change or replace the trigger.
What you need
Tools
-
-
-
Use a Torx T20 screwdriver to remove the nine 16.5 mm screws around the trigger assembly.
Ask FixBot
-
-
-
-
Use a Torx T20 screwdriver to remove the two 16.5 mm screws near the trigger.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
The Citadel Military College of South Carolina, Team 1-3, Eggleston Spring 2022 Member of The Citadel Military College of South Carolina, Team 1-3, Eggleston Spring 2022
CMCSC-EGGLESTON-S22S1G3
3 Members
24 Guides authored
