Fix Your Stuff Community Store

Ryobi RJ1861V Motor Housing Replacement

What you need

  1. Ryobi RJ1861V Motor Housing Replacement, Trigger Assembly: step 1, image 1 of 1

    • Use a Torx T20 screwdriver to remove the nine 16.5 mm screws around the trigger assembly.

    Edit

  2. Ryobi RJ1861V Motor Housing Replacement: step 2, image 1 of 2 Ryobi RJ1861V Motor Housing Replacement: step 2, image 2 of 2

    • Use a Torx T20 screwdriver to remove the two 16.5 mm screws near the trigger.

    Edit

  4. Ryobi RJ1861V Motor Housing Replacement, Motor Housing: step 3, image 1 of 1

    • Use a Torx T20 bit or screwdriver to remove the six 19 mm screws securing the gear case cover.

    Edit

  5. Ryobi RJ1861V Motor Housing Replacement: step 4, image 1 of 2 Ryobi RJ1861V Motor Housing Replacement: step 4, image 2 of 2

    • Use a Phillips #2 bit or screwdriver to remove the four 37 mm screws from the top and the bottom of the gear case.

    • Once these 4 screws are removed, you have access to the motor assembly.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 5

All Time: 116