Introduction

Replace a broken or faulty power jack for your Roku 3. The Roku 3 cannot power on without a functioning power jack.

Parts

No parts required.

Place the Roku 3 on the table face down and orient it so you can correctly read the writing.
  • Place the Roku 3 on the table face down and orient it so you can correctly read the writing.

Add Comment

Pull back the rubber protection in the top right corner to locate the screw. Repeat with the bottom right corner and bottom left corner. Repeat with the bottom right corner and bottom left corner.
  • Pull back the rubber protection in the top right corner to locate the screw.

  • Repeat with the bottom right corner and bottom left corner.

Add Comment

Remove the 9 mm screws from the three corners with a Hex 1.3 Screwdriver.
  • Remove the 9 mm screws from the three corners with a Hex 1.3 Screwdriver.

Add Comment

Deck the Halls
With tools and Fix Kits
Open the device by gently lifting the bottom half away from the top half of the device. Open the device by gently lifting the bottom half away from the top half of the device.
  • Open the device by gently lifting the bottom half away from the top half of the device.

Add Comment

Use your fingers to carefully lift the motherboard from the top half of the device.
  • Use your fingers to carefully lift the motherboard from the top half of the device.

Add Comment

Pull away the IO shield from the motherboard using your hands. Pull away the IO shield from the motherboard using your hands.
  • Pull away the IO shield from the motherboard using your hands.

Add Comment

Turn over the motherboard so the back is face up and almost all large silver components are resting facedown on the table. Orient it such that the backside of the HDMI port is in your upper right corner.
  • Turn over the motherboard so the back is face up and almost all large silver components are resting facedown on the table.

  • Orient it such that the backside of the HDMI port is in your upper right corner.

Add Comment

Desolder the connections of the A/C Power Port on the motherboard.
  • Desolder the connections of the A/C Power Port on the motherboard.

  • Remove the port.

  • For more information on soldering, check out iFixit's Soldering Guide.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Andy Hak

Member since: 10/07/2016

238 Reputation

2 Guides authored

Team

Cal Poly, Team 15-2, Livingston Fall 2016 Member of Cal Poly, Team 15-2, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G2

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 10

Past 30 Days: 35

All Time: 630