Introduction

The Rival single cup coffee maker has a plastic lid that is prone to breaking. The plastic hinges can easily break if the lid is pushed too far back. The lid is held in place by plastic clips and plastic tabs that act as a hinge.

  1. Lift lid up to an open position. Lift lid up to an open position.
    • Lift lid up to an open position.

  2. Remove the coffee filter by lifting the filter up and out of the device.
    • Remove the coffee filter by lifting the filter up and out of the device.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Locate the plastic clips keeping the lid in place. Pull the clips apart to free the lid. Pull the clips apart to free the lid.
    • Locate the plastic clips keeping the lid in place.

    • Pull the clips apart to free the lid.

  5. Lift the lid up in order to separate it from the coffee maker. It may take some force to detach the lid.
    • Lift the lid up in order to separate it from the coffee maker.

    • It may take some force to detach the lid.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Connor Tustin

Member since: 10/06/2016

204 Reputation

2 Guides authored

Team

Cal Poly, Team 10-6, Livingston Fall 2016 Member of Cal Poly, Team 10-6, Livingston Fall 2016

CPSU-LIVINGSTON-F16S10G6

5 Members

6 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 141