Introduction
Most of the issues for the Ring Doorbell 3 are solved by going into the device itself, such as replacing parts that have been broken down or eroded, or charging the battery. More information for solutions to these issues can be found on the Ring Doorbell Troubleshooting Page. Since the device needs to be taken apart to access the parts, some users may not know how to dismantle it, which is where this guide can come in handy. This guide tells you how to remove the faceplate from the device, allowing access inside the device.
What you need
-
-
Look at the bottom of the device and locate the arrow.
-
Use your fingers to push the silver faceplate in the direction of the arrow.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of North Texas, Team 1-5, Kilpatrick Fall 2023 Member of University of North Texas, Team 1-5, Kilpatrick Fall 2023
UNT-KILPATRICK-F23S1G5
4 Members
5 Guides authored
