Fix Your Stuff Community Store

Ring Spotlight Cam Battery Lights Replacement

Introduction

If you are having trouble with the motion-activated lights and you would like to replace them, follow the 4 steps that are provided. It will take approximately 15-35 minutes.

What you need

  1. Ring Spotlight Cam Battery Lights Replacement, Lights: step 1, image 1 of 1

    • Remove the top plastic pad by peeling it off with a metal spudger.

    Edit

  3. Ring Spotlight Cam Battery Lights Replacement: step 2, image 1 of 2 Ring Spotlight Cam Battery Lights Replacement: step 2, image 2 of 2

    • Remove the 7 PH00 screws around the four corners with PH00 of the lid.

    Edit

  4. Ring Spotlight Cam Battery Lights Replacement: step 3, image 1 of 1

    • Use the metal spudger set to break the glue lining and the motion sensor will pop out.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

2 Comments

this showed nothing about replacing the light bulb

Martha “purplemarty” Ewell - Reply

This is not a complete how to. The directions stop in the middle and don't show the replacement of the LEDs. Also no parts link for the replacement LED strips

Matt Newman - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 22

Past 30 Days: 87

All Time: 4,848