Fix Your Stuff Community Store

Ridgid Angle Grinder R10202 Carbon Brush Replacement

Introduction

This replacement guide will walk you through how to remove and replace the two carbon brushes. You may also find this guide useful if you need to inspect the carbon brush housing for debris that may be hindering the device's performance.

What you need

  1. Ridgid Angle Grinder R10202 Carbon Brush Replacement, Carbon Brush: step 1, image 1 of 2 Ridgid Angle Grinder R10202 Carbon Brush Replacement, Carbon Brush: step 1, image 2 of 2

    • Use a flathead screwdriver to unscrew the brush holder cap.

    Edit

  3. Ridgid Angle Grinder R10202 Carbon Brush Replacement: step 2, image 1 of 2 Ridgid Angle Grinder R10202 Carbon Brush Replacement: step 2, image 2 of 2

    • Using your fingers, gently lift the carbon brush up and out of its housing.

    • Repeat these steps to remove the other carbon brush on the opposing side.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 9

Past 30 Days: 28

All Time: 1,234