Introduction

Ricoh Shotmaster 130Z Film Release Spring Replacement.

Parts

No parts required.

  1. Push the switch that says "open" on the side of the camera. Push the switch that says "open" on the side of the camera.
    • Push the switch that says "open" on the side of the camera.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Once the compartment is open and unscrew the two 0.5mm Phillips screws that hold the spring in place. Replace the spring with a new one. Once the compartment is open and unscrew the two 0.5mm Phillips screws that hold the spring in place. Replace the spring with a new one.
    • Once the compartment is open and unscrew the two 0.5mm Phillips screws that hold the spring in place. Replace the spring with a new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

anna carolina von einem

Member since: 10/19/2016

450 Reputation

4 Guides authored

Team

UMass Dartmouth, Team 3-4, Isaacson Fall 2016 Member of UMass Dartmouth, Team 3-4, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G4

3 Members

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 68