Fix Your Stuff Community Store

Retro-Bit Retro Duo Controller Button and Pad Replacement.

Introduction

If your controller(s) have button malfunctions, they can be replaced.

What you need

  1. Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): step 1, image 1 of 3 Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): step 1, image 2 of 3 Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): step 1, image 3 of 3

    • With the controller on its face, remove the five 6 mm Phillips #1 screws.

    • After screw removal, carefully lift the controller casing.

    Edit

  2. Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 2, image 1 of 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 2, image 2 of 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 2, image 3 of 3

    • Pinch the top and bottom of the shoulder pads, then lift out.

    • There are small elastic pads below each shoulder pad. Replace these if they are not functioning correctly.

    Edit

  4. Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 3, image 1 of 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 3, image 2 of 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 3, image 3 of 3

    • Carefully lift the circuit board from the controller case.

    Edit

  5. Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 4, image 1 of 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 4, image 2 of 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 4, image 3 of 3

    • To replace the action button pad, lift this part out.

    • Lift the Select and Start button pad.

    • If replacing the D-Pad, lift this pad.

    • Pinch and lift the shoulder button pads.

    Edit

  6. Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 5, image 1 of 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 5, image 2 of 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: step 5, image 3 of 3

    • Support the controller face and push buttons toward the inner case.

    • Use care. The buttons have a tiny tab to keep them in place.

    • Support the controller face and push the D-Pad toward the inner case.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 3 other contributors

Evelyn

Member since: 09/25/17

223 Reputation

2 Guides authored

Badges: 4

+1 more badge

Team

USF Tampa, Team S4-G4, Eyestone Fall 2017 Member of USF Tampa, Team S4-G4, Eyestone Fall 2017

USFT-EYESTONE-F17S4G4

3 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 6

All Time: 1,169