iPad Mini CDMA Plastic Covers Replacement
Walter Galan and
Last updated on May 7, 2024
Views: 360
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 2
- Past 30 Days:
- 17
- All Time:
- 360
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.
Introduction
Go to step 1 ↓Prereq only.
What you need
Tools
-
-
Tool used on this step:Tweezers$4.99
-
Use tweezers to remove the small plastic cover on top of the horizontal screw on the right side of the Lightning connector housing.
Ask FixBot
-
-
-
-
Remove the plastic covering from the left side of the Lightning connector housing.
-
-
To reassemble your device, follow these instructions in reverse order.
