ResMed AirSense 10 Air Outlet Adapter Replacement
Jacey Cobb and 3 other contributors
Last updated on Sep 23, 2022
Views: 12K
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 63
- Past 30 Days:
- 268
- All Time:
- 11,558
Comments: 2
1 comment on steps, 1 guide comment.
Go to guide commentsCompleted: 7 8
7 people have marked this guide "completed." Will you be next?
8 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Over time the rubber seal on the air outlet elbow of the ResMed AirSense 10 medical ventilator will wear and cause small air leaks. If the hose and mask are verified to be not leaking, the leak can be located on the air outlet elbow. Check the air outlet elbow when trouble shooting leakages and replace as needed.
What you need
-
-
-
Position the ResMed Airsense 10 with the water reservoir facing towards you.
-
Remove the ResMed water tank.
Ask FixBot
-
-
-
Use the spudger to disable the lock on the air outlet elbow.
-
Remove the air outlet elbow through the back opening on the ResMed.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Team
The Citadel Military College of South Carolina, Team S1-G6, Eggleston Fall 2020 Member of The Citadel Military College of South Carolina, Team S1-G6, Eggleston Fall 2020
CMCSC-EGGLESTON-F20S1G6
3 Members
48 Guides authored
1 Guide Comment
Thanks for showing us how to replace the air outlet elbow. How about showing us the other rubber thingy. Having trouble trying to find them to buy new replacment ones. Thanks
