Image 1/1: Remove batteries by placing thumb on battery plate cover sliding it down to expose batteries.
  • Hold the on/off button for 3 seconds until the screen is black.

  • Remove batteries by placing thumb on battery plate cover sliding it down to expose batteries.

  • Turn camera upside down to allow the batteries to fall out.

Add Comment

Image 1/3: Remove 2 screws on the right side of the camera, and store them on a magnetic mat. Image 2/3: Remove 2 screws on the bottom of the camera, and store them on a magnetic mat. Image 3/3: Remove 1 screw on the left side of the camera, and store it on a magnetic mat.
  • There are 5 (4.5mm in length) screws on the sides of the camera that need to be removed. Use a Phillips #000 screwdriver to remove all screws.

  • Remove 2 screws on the right side of the camera, and store them on a magnetic mat.

  • Remove 2 screws on the bottom of the camera, and store them on a magnetic mat.

  • Remove 1 screw on the left side of the camera, and store it on a magnetic mat.

Add Comment

Image 1/2: Image 2/2:
  • Using a prying tool or fingernail, gently separate the back plate from the front plate, exposing the inside of the camera.

Add Comment

Image 1/1: Clean with general lens cleaner and microfiber fabric as necessary and replace.
  • Use fingers or tweezers to gently lift view finder out of socket.

  • Clean with general lens cleaner and microfiber fabric as necessary and replace.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dorey Chiu

Member since: 10/26/2014

1 Reputation

1 Guide authored

Team

Baylor, Team 8-15, Williams Fall 2014 Member of Baylor, Team 8-15, Williams Fall 2014

BU-WILLIAMS-F14S8G15

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 97