Parts

No parts required.

Image 1/2: Move the first release switch to the right position. Image 2/2: Move the second release switch to the right position while pulling the battery towards the top of the netbook.
  • Start by first removing the battery.

  • Move the first release switch to the right position.

  • Move the second release switch to the right position while pulling the battery towards the top of the netbook.

Add Comment

Image 1/1:
  • Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.

Add Comment

Image 1/2: Image 2/2:
  • While holding the top of the netbook, flip the netbook over.

Add Comment

Image 1/2: Image 2/2:
  • Carefully lift off the power bar assembly for access to the button and receiver.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mason McCaskill

Member since: 10/18/2013

925 Reputation

9 Guides authored

Team

Clemson, Team 14-2, Benson Fall 2013 Member of Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 246