Introduction

The cover is used for protecting the underlying circuit and contributing to the overall device's aesthetic.

Parts

No parts required.

Using a spudger, wedge the tip between the front and back case to pry them apart. Be careful to not apply excessive force since there are six fasteners on the screen's side that holds the cases firmly together. Be careful to not apply excessive force since there are six fasteners on the screen's side that holds the cases firmly together.
  • Using a spudger, wedge the tip between the front and back case to pry them apart.

  • Be careful to not apply excessive force since there are six fasteners on the screen's side that holds the cases firmly together.

Add Comment

The black rubber button pad can be removed by simply picking it up.
  • The black rubber button pad can be removed by simply picking it up.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Westley Courchene

Member since: 01/13/2015

2,415 Reputation

14 Guides authored

Team

USF Tampa, Team 1-1, Remmell Fall 2015 Member of USF Tampa, Team 1-1, Remmell Fall 2015

USFT-REMMELL-F15S1G1

5 Members

14 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 2

Past 30 Days: 10

All Time: 89