Introduction

Everyone has broken their favorite mug before. In this tutorial you will learn an easy way to salvage your favorite mug after the handle has been shattered. After completing all steps your mug will be able to be used again. However, the handle is no longer dishwasher or microwave safe.

Tools

Wash your mug clean and rinse the broken edges. Handle carefully to prevent further damage.
  • Wash your mug clean and rinse the broken edges. Handle carefully to prevent further damage.

  • Make sure you don't cut yourself on any sharp edges.

Add Comment

Collect the pieces of the handle and place them on a few paper towels. Piece them back together and make sure all of the parts are there. Piece them back together and make sure all of the parts are there.
  • Collect the pieces of the handle and place them on a few paper towels.

  • Piece them back together and make sure all of the parts are there.

what exactly do you mean by "place them back together"?

Daniel Riedeman - Reply

Take two of the broken pieces that fit together and glue them. Cover the piece in a thin layer of glue (about one drop) and try to avoid getting glue on your hands, keep paper towels close by incase you do.
  • Take two of the broken pieces that fit together and glue them.

  • Cover the piece in a thin layer of glue (about one drop) and try to avoid getting glue on your hands, keep paper towels close by incase you do.

Add Comment

Continue glueing other pieces of the handle in place until all pieces are together. Once the handle is glued together, wait for the glue to dry before moving on.  It will take about 30 minutes to dry. Be very delicate with the piece while it is drying. Before the glue sets the handle will be very fragile.
  • Continue glueing other pieces of the handle in place until all pieces are together.

  • Once the handle is glued together, wait for the glue to dry before moving on. It will take about 30 minutes to dry.

  • Be very delicate with the piece while it is drying. Before the glue sets the handle will be very fragile.

on average how long do you think the drying will take

also your note in comment four is the same as your step five

Justin Salonia - Reply

After the handle has dried, test that the glued pieces are sturdy. Do not purposely break it apart, but make sure that the pieces are secure.
  • After the handle has dried, test that the glued pieces are sturdy.

  • Do not purposely break it apart, but make sure that the pieces are secure.

  • If the handle happens to break anywhere, repeat step 4.

Add Comment

Once the handle is dried and secure. Begin placing glue on the cup where the handle should attach. After gluing both places, gently press handle ends into place. The handle should fit in almost perfectly when alined.
  • Once the handle is dried and secure. Begin placing glue on the cup where the handle should attach.

  • After gluing both places, gently press handle ends into place.

  • The handle should fit in almost perfectly when alined.

Add Comment

Now let the glue dry, and your mug is usable again. Remember it will take about 30 minutes to dry. I would not advise washing this mug in the dishwasher anymore because this makes it more likely to break again.
  • Now let the glue dry, and your mug is usable again.

  • Remember it will take about 30 minutes to dry.

  • I would not advise washing this mug in the dishwasher anymore because this makes it more likely to break again.

Add Comment

Conclusion

After completing all steps your mug will now be able to be used again. Remember that the handle is no longer dishwasher or microwave safe.

Kathryn Webb

Member since: 04/09/2015

118 Reputation

1 Guide authored

Team

Cal Poly, Team 28-2, Green Spring 2015 Member of Cal Poly, Team 28-2, Green Spring 2015

CPSU-GREEN-S15S28G2

4 Members

2 Guides authored

4 Comments

Do introduction

Daniel Riedeman - Reply

In Step 2, we would advise against handling any of the smallest shards of the mug. For safety reasons, we would just stick to adhering the larger, less sharp pieces of the broken handle.

Do you recommend any specific type of glue? Some glues (such as Gorilla glue) need to be applied in a very small amount, due to expansion. Make sure you give instructions as to how much glue to apply (apply a pea-sized amount, apply enough so that it covers the whole piece, etc.) Does the mug need to be damp before applying glue?

Approximately how long did it take for the glue to dry? Results may vary from person to person, but it's a good idea to give an estimated time frame. "After completing all steps your mug will now be able to be used again. Remember that the handle is no longer dishwasher or microwave safe," should be placed either in the intro or as a special bullet in your guide. The audience should know this before they begin the repair.

Kathryn Webb - Reply

Be sure to have all team members proofread the text for spelling, grammar, and punctuation. We have noticed the misspelling of "break" throughout your guide.

Kathryn Webb - Reply

Thank God we always have the spelling and grammar police on the internet and I bet she is a Democrat.

Wolfman - Reply

Add Comment

View Statistics:

Past 24 Hours: 10

Past 7 Days: 92

Past 30 Days: 412

All Time: 4,812