Introduction

Learn how to stop the buzzing and bring back clear sound on your headset.

Parts

No parts required.

Remove the cushion of the speaker that the buzzing noise is occurring. Remove the cushion of the speaker that the buzzing noise is occurring.
  • Remove the cushion of the speaker that the buzzing noise is occurring.

Add Comment

Use the Philips PH00 screwdriver to unscrew the four screws located on the inner part of the rail adjustment. Use the Philips PH00 screwdriver to unscrew the four screws located on the inner part of the rail adjustment. Use the Philips PH00 screwdriver to unscrew the four screws located on the inner part of the rail adjustment.
  • Use the Philips PH00 screwdriver to unscrew the four screws located on the inner part of the rail adjustment.

Add Comment

Deck the Halls
With tools and Fix Kits
Remove the black metal bracket by unscrewing the two screws connecting it to the railing. Remove the black metal bracket by unscrewing the two screws connecting it to the railing.
  • Remove the black metal bracket by unscrewing the two screws connecting it to the railing.

Add Comment

Unscrew the screws in the locations shown to remove the speaker cover. Unscrew the screws in the locations shown to remove the speaker cover.
  • Unscrew the screws in the locations shown to remove the speaker cover.

Add Comment

Place the black cover to the side, near the rest of the setup.
  • Place the black cover to the side, near the rest of the setup.

Add Comment

Observe the wire orientation: The red metal wire should be to the far left, while the green metal wire should be next to it, the skinny red rubber wire should be second to the right, and the thick red rubber wire should be to the far right. If any of the wires are out of place fasten them into their proper positions. Observe the wire orientation: The red metal wire should be to the far left, while the green metal wire should be next to it, the skinny red rubber wire should be second to the right, and the thick red rubber wire should be to the far right. If any of the wires are out of place fasten them into their proper positions.
  • Observe the wire orientation: The red metal wire should be to the far left, while the green metal wire should be next to it, the skinny red rubber wire should be second to the right, and the thick red rubber wire should be to the far right. If any of the wires are out of place fasten them into their proper positions.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Essien Benjamin

Member since: 03/19/2015

166 Reputation

1 Guide authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 38

All Time: 1,498