Introduction

How to adjust exposure. Use when pictures are over or under exposed.

Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place. If your camera is old or dirty, it may take more force to open the flash assembly.
  • Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place.

  • If your camera is old or dirty, it may take more force to open the flash assembly.

Add Comment

Locate the exposure setting switch under the main lens on the face of the camera.
  • Locate the exposure setting switch under the main lens on the face of the camera.

Add Comment

Slide light switch towards the black arrow on the left to decrease exposure. Slide light switch towards the white arrow on the right to increase exposure.
  • Slide light switch towards the black arrow on the left to decrease exposure.

  • Slide light switch towards the white arrow on the right to increase exposure.

Add Comment

Finish Line

One other person completed this guide.

Matthew Lessig

Member since: 01/20/2010

45 Reputation

3 Guides authored

Team

Cal Poly, Team 3-18, Maness Winter 2010 Member of Cal Poly, Team 3-18, Maness Winter 2010

CPSU-MANESS-W10S3G18

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 9

Past 30 Days: 33

All Time: 7,394