Introduction

Optical connector has been partially covered by the backplate out of the box - simply disassembled the device and reassembled it correctly.

  1. This is what my original problem has been - optical connector is unuseable this way.
    • This is what my original problem has been - optical connector is unuseable this way.

    • instead of returning the unit to the online shop I decided to fix it myself ;)

    Add Comment

  2. I opened the device as it is visible in the teardown.
    • I opened the device as it is visible in the teardown.

    • removed the circuit board

    • and reinserted it - taking care that the optical connector get's at the correct position.

    • 10 minutes later I've finished my work and the result is perfect :)

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

RFischer

Member since: 12/29/2014

265 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 7

All Time: 1,343