No parts required.
This guide will show you how to remove and replace the camera for a Motorola V3c.
Remove the four rubber-like pieces, from all corners of the screen, from the surrounding area of the screen.
Carefully unscrew all four screws on the outer screen. So that you do not strip or damage the screws. Use a T4 screwdriver to complete this step.
Pry the screen open using a plastic Uspudger, bending to harshly could cause cracks so take caution.
Take the screen housing off from the casing.
Pry screen cover off with plastic spudger
Remove small black sticker covering the camera ribbon connector
Flip over small hinge that cover the camera ribbon connection
Pull off the rubber camera cover and camera
Embed this guide
Choose a size and copy the code below to embed this guide as a small widget on your site / forum.