Parts

No parts required.

  1. Flip device upside down and remove the 4 foam pads at each corner.
    • Flip device upside down and remove the 4 foam pads at each corner.

    • Remove the 4 screws using a Philips Screwdriver.

    • Gently lift the case off of the body and set down in a safe place.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
    • Unscrew Circuit board attached to the top of the case with the one screw in the center. Be careful not to strip the screw/break the circuit board.

  3. Make sure all of the buttons are move-able.
    • Make sure all of the buttons are move-able.

    • Press buttons on circuit board while listening for a click.

    • If everything works on the inside, that might mean you need a new circuit board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 8

All Time: 310