Skip to main content

Fix Your Stuff

Right to Repair

Store

Tools

Parts

No parts specified.

  1. Before starting, remember to unplug the device.
    • Before starting, remember to unplug the device.

  2. Remove the handle by unscrewing the screw. Remove the handle by unscrewing the screw. Remove the handle by unscrewing the screw.
    • Remove the handle by unscrewing the screw.

  3. Pry up the sanding belt to remove it. Pry up the sanding belt to remove it.
    • Pry up the sanding belt to remove it.

  4. Unscrew the four screws to access the drive belt.
    • Unscrew the four screws to access the drive belt.

  5. Remove the drive belt. Remove the drive belt.
    • Remove the drive belt.

  6. Replace with the new drive belt. To put it on, place the drive belt on the right wheel first.
    • Replace with the new drive belt. To put it on, place the drive belt on the right wheel first.

  7. Screw the protection cap back into place with the four screws. Screw the protection cap back into place with the four screws.
    • Screw the protection cap back into place with the four screws.

  8. Replace the sanding belt and handle. Replace the sanding belt and handle.
    • Replace the sanding belt and handle.

Finish Line

One other person completed this guide.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Céline Chemineau

Member since: 01/29/2020

16,032 Reputation

95 Guides authored

Team

Leroy Merlin Member of Leroy Merlin

Community

35 Members

159 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 31

All Time: 254