Introduction

Outline what you are going to teach someone how to do.

Parts

No parts required.

  1. Remove 3 screws running along back edge of case cover. Remove 2 screws from each side of case cover.
    • Remove 3 screws running along back edge of case cover.

    • Remove 2 screws from each side of case cover.

  2. Grab edges of cover, pull outward slightly, and pull straight up.
    • Grab edges of cover, pull outward slightly, and pull straight up.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Be sure case cover has been removed prior to back panel removal. Remove 5 screws from panel, as shown.
    • Be sure case cover has been removed prior to back panel removal.

    • Remove 5 screws from panel, as shown.

  5. Use flat-head screwdriver to push in square tabs, located on each side of the back panel. Use caution, the edges are sharp.
    • Use flat-head screwdriver to push in square tabs, located on each side of the back panel.

    • Use caution, the edges are sharp.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kevin

Member since: 04/26/2011

351 Reputation

8 Guides authored

Team

Cal Poly, Team 18-20, Garner Spring 2011 Member of Cal Poly, Team 18-20, Garner Spring 2011

CPSU-GARNER-S11S18G20

4 Members

11 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 2,002