Fix Your Stuff Community Store

Removing the Rear Access Panels in the Ulco Integrus PSV

Medical Equipment
Neither iFixit nor this repair guide is endorsed by or affiliated with the medical device manufacturer.

Introduction

Removing the rear access panels will provide access to the battery and o-rings. Make sure all power is disconnected before beginning this process to ensure safety.

For more information on removing the rear access panels, please refer to page 11 (section 4.4.2) in the service manual.

NOTE: Screw types and lengths are not specified in the manuals

What you need

  1. Removing the Rear Access Panels in the Ulco Integrus PSV, Removing the Rear Access Panels in the Ulco Integrus PSV: step 1, image 1 of 1

    • Remove the rear plastic cover by turning the single hex key retaining clip to free the cover.

    Edit

  2. Removing the Rear Access Panels in the Ulco Integrus PSV: step 2, image 1 of 1

    • Remove the four screws mounted to the cover plate using a 4mm Allen key.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 3 other contributors

Jake Lane

Member since: 04/22/19

489 Reputation

3 Guides authored

Badges: 6

+3 more badges

Team

Cal Poly, Team S7-G13, Paton Spring 2020 Member of Cal Poly, Team S7-G13, Paton Spring 2020

CPSU-PATON-S20S7G13

3 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 55