Introduction

In this guide you will be removing the side case doors. This is a necessary step to replace every other component on the HP Compaq dx2000MT.

Image 1/1:
  • Turn off your computer and remove the power cable by pulling it straight out of its socket.

Add Comment

Image 1/2: Image 2/2:
  • Remove the 2 Phillips #2 screws that secure the case door to the device.

Add Comment

Image 1/3: This may take considerable force so keep pushing! Image 2/3: Once you slide the door back, remove it by pulling it outwards from the device. Image 3/3: Once you slide the door back, remove it by pulling it outwards from the device.
  • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

  • Once you slide the door back, remove it by pulling it outwards from the device.

Add Comment

Image 1/3: Once again, this may take considerable force. Image 2/3: Once you slide the door back, remove it by pulling it outwards from the device. Image 3/3: Once you slide the door back, remove it by pulling it outwards from the device.
  • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

  • Once you slide the door back, remove it by pulling it outwards from the device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Logan Pace

Member since: 10/12/2011

1,889 Reputation

9 Guides authored

Team

Cal Poly, Team 17-16, Regan Fall 2011 Member of Cal Poly, Team 17-16, Regan Fall 2011

CPSU-REGAN-F11S17G16

4 Members

10 Guides authored

One Comment

Good , trying an apps

Nur Izzatie - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 1,475