Parts

No parts required.

Introduction

This guide will focus on removing the back cover of the upper part of the phone. This will allow the user to access many of the other parts of the phone, including the motherboard, the keypad, the antenna, and the speaker.

Image 1/2: Locate the two silver screws near the hinge where the battery is housed. Image 2/2: Remove the silver screws using a Phillips head #2 screwdriver.
  • Orient the phone so that the phone model and other descriptive information is facing upward.

  • Locate the two silver screws near the hinge where the battery is housed.

  • Remove the silver screws using a Phillips head #2 screwdriver.

Add Comment

Image 1/3: Make sure you pull the cover off carefully in order to prevent damage to the back cover. Image 2/3: Make sure you pull the cover off carefully in order to prevent damage to the back cover. Image 3/3: Make sure you pull the cover off carefully in order to prevent damage to the back cover.
  • Pull off the back panel of the phone.

  • Make sure you pull the cover off carefully in order to prevent damage to the back cover.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Elizabeth Kelly

Member since: 10/22/2012

501 Reputation

5 Guides authored

Team

Clemson, Team 15-1, Benson Fall 2012 Member of Clemson, Team 15-1, Benson Fall 2012

CLEM-BENSON-F12S15G1

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 18

All Time: 553