Introduction

This guide will explain how to remove the display hinge. The tools required for this section are the spudger and the PH 2 screwdriver.

Parts

No parts required.

  1. Before starting, make sure the display is UNPLUGGED.  Failure to do so can result in shock and serious injury.
    • Before starting, make sure the display is UNPLUGGED. Failure to do so can result in shock and serious injury.

    • Flip the Cinema Display so it is on its face and the feet are pointed away from you.

    • Using the PH 2 screwdriver, unscrew the three feet screws (9.52 x 4.43 mm).

    • Remove the back foot from the hinge mount by gently pulling it upwards.

    Add Comment

  2. Remove the back plate screws (5.25 x 4.43 mm) using the PH 2 screw driver.
    • Remove the back plate screws (5.25 x 4.43 mm) using the PH 2 screw driver.

    • Lift the back plate off of the display.

    • Completely remove the back plate and set it aside.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the Apple Display Connector plate screws (9.52 x 3.43 mm) with the PH 2 screwdriver.

    • Once the two screws have been removed, move the cord out of the way.

    Add Comment

    • Remove the hinge plate screws (5.52 x 3.43 mm) with the PH 2 screw driver.

    • Then lift out the hinge mount.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Thomas Harper

Member since: 04/01/2011

227 Reputation

1 Guide authored

Team

Cal Poly, Team 10-41, Forte Spring 2011 Member of Cal Poly, Team 10-41, Forte Spring 2011

CPSU-FORTE-S11S10G41

5 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 28

All Time: 6,084