Introduction

Need to get inside the amp? Remove the back panel!

Image 1/1: Use a Phillips #0 screwdriver to remove the four 21.7mm screws holding the back panel to the frame.
  • Be sure to unplug the device before proceeding.

  • Use a Phillips #0 screwdriver to remove the four 21.7mm screws holding the back panel to the frame.

Add Comment

Image 1/1:
  • Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.

Add Comment

Image 1/1:
  • Once the top is separated, use your hand to remove the back panel from the unit.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Greg Sawers

Member since: 09/27/2012

71 Reputation

3 Guides authored

Team

Cal Poly, Team 24-30, Regan Fall 2012 Member of Cal Poly, Team 24-30, Regan Fall 2012

CPSU-REGAN-F12S24G30

5 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 36

All Time: 3,352