Image 1/1: The back cover is the access point for the user-removable battery. Removing the back cover also gives the user access to the hard-reset button.
  • Flip the Delphi MyFi XM2GO Device on its back to start the cover-removal process.

  • The back cover is the access point for the user-removable battery. Removing the back cover also gives the user access to the hard-reset button.

Add Comment

Image 1/3: Press this button at the top while making a firm grip on the battery cover. Image 2/3: As the button is pressed, move the cover towards the bottom of the device while applying moderate pressure to the cover. Image 3/3: Be careful to not press down too hard on the battery cover as it is made of plastic.
  • Locate the large button on the top back of the device. This button is used to release the latch holding the sliding back cover in place.

  • Press this button at the top while making a firm grip on the battery cover.

  • As the button is pressed, move the cover towards the bottom of the device while applying moderate pressure to the cover.

  • Be careful to not press down too hard on the battery cover as it is made of plastic.

  • The battery removal tab may pop up during the cover removal process.

Add Comment

Image 1/1:
  • After the cover is removed, the white Lithium Ion battery is visible.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Scott Byer

Member since: 03/09/2012

61 Reputation

5 Guides authored

Team

Clemson, Team 1-2, Benson Spring 2012 Member of Clemson, Team 1-2, Benson Spring 2012

CLEM-BENSON-S12S1G2

3 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,248