Fix Your Stuff Community Store

Portable Power Station Internals Removal

Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

Introduction

Prerequisite‑only guide for removing the Portable Power Station internals.

  1. Portable Power Station Internals Removal, Remove the chassis: step 1, image 1 of 2 Portable Power Station Internals Removal, Remove the chassis: step 1, image 2 of 2

    • Place your fingers on the rear cover screw holes and push the chassis slightly out of the enclosure.

    Edit

  3. Portable Power Station Internals Removal: step 2, image 1 of 3 Portable Power Station Internals Removal: step 2, image 2 of 3 Portable Power Station Internals Removal: step 2, image 3 of 3

    • Slide the chassis fully out of the enclosure, making sure the battery connector doesn't get snagged.

    • During reassembly:

    • Make sure the battery is disconnected before sliding the chassis into the enclosure. Otherwise, you'll damage the battery connector.

    • Insert the battery connector side of the chassis into the end of the enclosure closest to the kickstand and slide it into place.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Spencer Day

Member since: 09/14/22

154,988 Reputation

1,033 Guides authored

Badges: 38

+35 more badges

Team

iFixit Member of iFixit

Staff

123 Members

23,758 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 51