Introduction

Remove the main fan from the case.

Pull on outer latch. Lower door until it is level with your work surface.
  • Pull on outer latch.

  • Lower door until it is level with your work surface.

  • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

Add Comment

Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver. The fan housing will still be connected to the computer by a power cable which will be removed in the next step.
  • Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.

  • The fan housing will still be connected to the computer by a power cable which will be removed in the next step.

Add Comment

Remove the power cable from the fan and detach bracing.
  • Remove the power cable from the fan and detach bracing.

Add Comment

Finish Line

2 other people completed this guide.

Justin Petrilli

Member since: 01/21/2010

2,490 Reputation

11 Guides authored

Team

Cal Poly, Team 13-24, Maness Winter 2010 Member of Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 Members

13 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 4,759