Introduction

This guide will systematically explain how to replace the shaving blade of the Remington MB4040. A rough or irritating shave is most likely caused by a dull blade. The replacement of this dull blade will allow for a more comfortable shave.

Parts

No parts required.

Press the black button to release the blade from its locked position. Press the black button to release the blade from its locked position. Press the black button to release the blade from its locked position.
  • Press the black button to release the blade from its locked position.

Add Comment

Deck the Halls
With tools and Fix Kits
Remove the two 8.0 mm PH00 Phillips head screws from the blade assembly. Detach the silver blade from the blade assembly and replace with the new blade. Detach the silver blade from the blade assembly and replace with the new blade.
  • Remove the two 8.0 mm PH00 Phillips head screws from the blade assembly.

  • Detach the silver blade from the blade assembly and replace with the new blade.

The entre assemble comes apart once you remove the blade. I cannot figure out how to get it back together and in the housing. Any suggestions?

sublime - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cameron Carnahan

Member since: 01/20/2015

685 Reputation

6 Guides authored

Team

USF Tampa, Team 1-5, Blackwell Winter 2015 Member of USF Tampa, Team 1-5, Blackwell Winter 2015

USFT-BLACKWELL-W15S1G5

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 24

Past 30 Days: 133

All Time: 3,267