Introduction
Utiliza esta guia para remover o reemplazar los tornillos Pentalobe.
What you need
-
-
Apaga tu iPhone antes de comenzar el desensamblaje.
-
Retira los dos tornillos Pentalobe P2 de 3.6 mm situados junto al conector Lightning.
-
-
Para reensamblar tu dispositivo, sigue estas instrucciones en orden inverso.
Para reensamblar tu dispositivo, sigue estas instrucciones en orden inverso.
Cancel: I did not complete this guide.
100 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
8 Comments
P2 Pentalobe Screwdriver