Introduction

This guide will lead you through the steps necessary to access the screen's components as well as how to assure it is properly connected.

Parts

No parts required.

Flip the device over
  • Flip the device over

Add Comment

Unscrew the 2 screws closest to the screen
  • Unscrew the 2 screws closest to the screen

Add Comment

Flip the device back over
  • Flip the device back over

  • It is now standing right side up

Add Comment

Unscrew the top.
  • Unscrew the top.

Add Comment

Deck the Halls
With tools and Fix Kits
Take the top of the device off.
  • Take the top of the device off.

Add Comment

Unscrew the button board.
  • Unscrew the button board.

Add Comment

Take off the button board.
  • Take off the button board.

Add Comment

Unscrew all visible screws on the black logic board cover.
  • Unscrew all visible screws on the black logic board cover.

Add Comment

Lift the screen straight up out of the device.
  • Lift the screen straight up out of the device.

Add Comment

Check that the single input plug from the logic board  to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.
  • Check that the single input plug from the logic board to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.

  • Also check that the 2 output plugs from the screen to the logic board are completely pushed in by pressing them firmly into the highlighted sockets.

  • You have successfully reconnected your display screen.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Nick Sherman

Member since: 09/26/2012

31 Reputation

1 Guide authored

Team

Cal Poly, Team 7-50, Forte Fall 2012 Member of Cal Poly, Team 7-50, Forte Fall 2012

CPSU-FORTE-F12S7G50

5 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 338