Parts

No parts required.

Remove the teflon tape from the bottom of the mouse with a spudger.
  • Remove the teflon tape from the bottom of the mouse with a spudger.

Remove the four screws with the Phillips head #00 screwdriver.
  • Remove the four screws with the Phillips head #00 screwdriver.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Gently pull on the top plastic plate of the device and carefully unplug the white cord from the circuit board.
  • Gently pull on the top plastic plate of the device and carefully unplug the white cord from the circuit board.

Gently pull up on the two side plastic plates.
  • Gently pull up on the two side plastic plates.

Plug  the new top casing's cable back into the socket on the right side of the circuit board near the middle.
  • Plug the new top casing's cable back into the socket on the right side of the circuit board near the middle.

  • Reassemble the device.

  • Test device to make sure the connections function correctly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 9

Past 30 Days: 56

All Time: 314