Introduction

In this guide I will show you how to change SD card in your Raspberry Pi 3.

Tools

Parts

  1. The Raspberry Pi 3 should look like this closed.
    • The Raspberry Pi 3 should look like this closed.

  2. Open the top lid like I have done on the image.
    • Open the top lid like I have done on the image.

    • The top is marked that you are gonna remove in the next step.

    • Now remove the cover for the two covers.

    • It should look like the image.

    • I have marked the covers for the next step.

    • Remove the two sides.

    • It should look like the image.

    • Now we should successfully have removed the case.

    • Notice that the side shown on the first image is the one that we are intrested in.

    • When we have flipped the Pi 3 over we can remove the SD card.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

ΛΛKΛRΞT

Member since: 11/22/2017

148 Reputation

1 Guide authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 20

All Time: 273