Skip to main content

This teardown is in progress – Reload periodically to see the latest changes!

What you need

  1. Rabbit R1 Chip ID, Main Board Side 1: step 1, image 1 of 2 Rabbit R1 Chip ID, Main Board Side 1: step 1, image 2 of 2
    • MediaTek MT6765V Helio P35 octa-core applications & baseband processor

    • Samsung KMDV6001DA-B620 64 GB NAND flash & 6 GB LPDDR4X SDRAM memory

    • MediaTek MT6357CRV power management

    • Awinic AW87390FCR audio amplifier

    • MediaTek MT6680P 1 A / Adj. LDO regulator

  2. Rabbit R1 Chip ID, Main Board Side 1 - Connectivity: step 2, image 1 of 1
    • MediaTek MT6631N Bluetooth & WiFi controller

  3. Rabbit R1 Chip ID, Main Board Side 1 - Sensors: step 3, image 1 of 1
    • TDK InvenSense accelerometer & gyroscope

  4. Rabbit R1 Chip ID, Main Board Side 1: step 4, image 1 of 2 Rabbit R1 Chip ID, Main Board Side 1: step 4, image 2 of 2
    • MediaTek MT6371P power management

    • Ruimeng Technology MS35774 stepper motor driver

    • ETA Semiconductor ETA1090 synchronous step-up converter

    • Halo Microelectronics HL7593WL02 3 A buck converter

    • MediaTek MT6691ZXP 3 A step-down converter

    • Likely Awinic load switch

  5. Rabbit R1 Chip ID, Main Board Side 1 - Connectivity: step 5, image 1 of 1
    • MediaTek MT6177W RF transceiver

    • OnMicro OM8443-26 multimode multiband power amplifier

    • OnMicro OM8816-52 power amplifier module

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 42

Past 30 Days: 311

All Time: 613