Fix Your Stuff Community Store

RCA Pro10 Edition Speaker Replacement

Introduction

This guide will serve as a step-by-step guide for speaker replacement.

What you need

  1. RCA Pro10 Edition Speaker Replacement, Speaker: step 1, image 1 of 2 RCA Pro10 Edition Speaker Replacement, Speaker: step 1, image 2 of 2

    • Using a separating tool, look for a seam in the plastic casing that looks most accessible.

    • Use the prying tool to separate the front and back casing, working your way around the perimeter.

    • Utilize a card tool or a pick to assist in keeping the case separated.

    • To reassemble the device simply align the two casing halves and pinch to snap together or press down on the edges while the device in on a table.

    Edit

  3. RCA Pro10 Edition Speaker Replacement: step 2, image 1 of 1

    • Flip over the back of the device while keeping it close to the front, the speaker is attached to it.

    • Remove the yellow tape securing the speaker to the back casing.

    Edit

  4. RCA Pro10 Edition Speaker Replacement: step 3, image 1 of 2 RCA Pro10 Edition Speaker Replacement: step 3, image 2 of 2

    • Use the separating tool to pry the speaker from its surface.

    • Use caution when removing the speaker, you may damage the screen.

    • Cut or desolder the wires to replace or repair the speaker.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 5 other contributors

Dayne Russell

Member since: 01/27/15

401 Reputation

4 Guides authored

Badges: 5

+2 more badges

Team

Pasco Hernando, Team 1-1, Prince Winter 2015 Member of Pasco Hernando, Team 1-1, Prince Winter 2015

PHSC-PRINCE-W15S1G1

6 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 746