Fix Your Stuff Community Store

RCA 8 Apollo Back Panel Replacement

Introduction

Use this guide to replace the back panel on your RCA Apollo 8 tablet (identified with model number RCT6573W23).

What you need

  1. RCA 8 Apollo Back Panel Replacement, Back Panel: step 1, image 1 of 1

    • Before you begin, discharge your tablet battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your tablet before beginning to disassemble.

    Edit

  3. RCA 8 Apollo Back Panel Replacement: step 2, image 1 of 2 RCA 8 Apollo Back Panel Replacement: step 2, image 2 of 2

    • Insert an iFixit opening tool into the gap between the tablet and back panel.

    • Using a combination of iFixit opening tools and iFixit opening picks, pry the tablet upward around its perimeter to release it from the plastic rear case.

    • If inserted too far, an opening pick can damage your device. It is helpful to mark the edge with an opening pick, or opening tool at a depth that will not damage the inner contents of the tablet.

    Edit

  4. RCA 8 Apollo Back Panel Replacement: step 3, image 1 of 2 RCA 8 Apollo Back Panel Replacement: step 3, image 2 of 2

    • Disconnect the red and black speaker wires from the tablet.

    • The front and back of the tablet will be disconnected.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 3 other contributors

Chantel Pfiefer

Member since: 04/15/24

219 Reputation

2 Guides authored

Badges: 4

+1 more badge

Team

Casper College, Team 1-1, Lareau Spring 2024 Member of Casper College, Team 1-1, Lareau Spring 2024

CASC-LAREAU-S24S1G1

3 Members

4 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 114