Fix Your Stuff Community Store

RCA 10 Viking Pro RCT6K03W13 Battery Replacement

Introduction

This guide will talk you through the process of replacing the battery in your RCA 10 Viking Pro RCT6K03W13.

What you need

  1. RCA 10 Viking Pro RCT6K03W13 Battery Replacement, Backplate: step 1, image 1 of 3 RCA 10 Viking Pro RCT6K03W13 Battery Replacement, Backplate: step 1, image 2 of 3 RCA 10 Viking Pro RCT6K03W13 Battery Replacement, Backplate: step 1, image 3 of 3

    • Remove the three Phillips #00 screws at the bottom of the device.

    Edit

  2. RCA 10 Viking Pro RCT6K03W13 Battery Replacement: step 2, image 1 of 2 RCA 10 Viking Pro RCT6K03W13 Battery Replacement: step 2, image 2 of 2

    • Remove the two Phillips #00 screws to the left and right of the keyboard connector.

    Edit

  3. RCA 10 Viking Pro RCT6K03W13 Battery Replacement: step 3, image 1 of 1

    • Pull on one of the bottom corners to begin to pull off the back plate.

    Edit

  5. RCA 10 Viking Pro RCT6K03W13 Battery Replacement: step 4, image 1 of 2 RCA 10 Viking Pro RCT6K03W13 Battery Replacement: step 4, image 2 of 2

    • Work around the outside of the chassis, using the spudger to pry the backplate off.

    • After doing this for about half the device, the backplate should pop right off.

    Edit

  6. RCA 10 Viking Pro RCT6K03W13 Battery Replacement, Battery: step 5, image 1 of 1

    • Remove the tape over the connectors on the motherboard and other side of the battery.

    Edit

  7. RCA 10 Viking Pro RCT6K03W13 Battery Replacement: step 6, image 1 of 1

    • Disconnect the red and black keyboard wires connecting the battery to the motherboard.

    Edit

  8. RCA 10 Viking Pro RCT6K03W13 Battery Replacement: step 7, image 1 of 1

    • Disconnect the black ribbon cable running over the battery. Flip up the black clamp and pull the cable out.

    Edit

  9. RCA 10 Viking Pro RCT6K03W13 Battery Replacement: step 8, image 1 of 2 RCA 10 Viking Pro RCT6K03W13 Battery Replacement: step 8, image 2 of 2

    • Remove the cable over the battery connecting the motherboard and the power connector.

    • Flip up the black clamp and pull the cable out.

    Edit

  10. RCA 10 Viking Pro RCT6K03W13 Battery Replacement: step 9, image 1 of 2 RCA 10 Viking Pro RCT6K03W13 Battery Replacement: step 9, image 2 of 2

    • Pull out battery. It is taped to the device so it is safe to pull out.

    • Look for damage to the battery. If damaged, make sure to not get any acid on your fingers.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Author

with 2 other contributors

Ryan Wickett

Member since: 10/25/19

632 Reputation

3 Guides authored

Badges: 11

+8 more badges

Team

UMass Dartmouth, Team S1-G8, O'Connell Fall 2019 Member of UMass Dartmouth, Team S1-G8, O'Connell Fall 2019

UMASSD-O'CONNELL-F19S1G8

3 Members

4 Guides authored

4 Comments

Where can I get the battery for this?

Justin - Reply

You can get a battery from Amazon or Walmart.com your wellcome ?

GLENDA Vandergrift -

How much voltage should the battery put out in order for the tablet to turn on?

Jesus Rios - Reply

How much

How much

jennylyne_08 - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 10

Past 30 Days: 50

All Time: 3,055