Tools

No tools required.

Parts

No parts required.

Image 1/2: Then, by simultaneously unlocking the left latch, lift the battery out of its socket. Image 2/2: Then, by simultaneously unlocking the left latch, lift the battery out of its socket.
  • Start by unlocking the right locking latch.

  • Then, by simultaneously unlocking the left latch, lift the battery out of its socket.

Add Comment

Image 1/2: Then, remove it and put it on your workplan. Image 2/2: Then, remove it and put it on your workplan.
  • Begin by spotting the dummy memory card.

  • Then, remove it and put it on your workplan.

Add Comment

Image 1/3: Unscrew them and place them on your work surface. Image 2/3: Then, un-clip the bottom cover, starting with the side shown in the third picture. Image 3/3: Then, un-clip the bottom cover, starting with the side shown in the third picture.
  • Locate the 15 screws that hold the bottom cover of the device in place.

  • Unscrew them and place them on your work surface.

  • Then, un-clip the bottom cover, starting with the side shown in the third picture.

Add Comment

Image 1/3: Find and separate the spring blades that maintain the memory module in place (left). Image 2/3: Remove the memory module (RAM) from its connector. Image 3/3: Remove the memory module (RAM) from its connector.
  • Find and separate the spring blades that maintain the memory module in place (right).

  • Find and separate the spring blades that maintain the memory module in place (left).

  • Remove the memory module (RAM) from its connector.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Felice Suglia

Member since: 06/15/2013

9,050 Reputation

131 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 55