Introduction

This guide shows what's involved and the how-to in replacing the camera on the tablet device.

Begin the process by using a PH00 Phillips screw driver.
  • Begin the process by using a PH00 Phillips screw driver.

    • Remove the two 1.2mm x 3mm screws at the bottom of the tablet.

Add Comment

Use the iFixit plastic opening tool to pry open the back of the tablet. Do not remove the back case completely as tape has to be removed from the wires, and pulling the case apart can tear off the wires.
  • Use the iFixit plastic opening tool to pry open the back of the tablet.

    • Do not remove the back case completely as tape has to be removed from the wires, and pulling the case apart can tear off the wires.

Add Comment

Use the spudger to unhinge the camera from its socket.
  • Use the spudger to unhinge the camera from its socket.

Add Comment

Use the plastic opening pick and the Phillips screwdriver to remove the camera from its soldering on the motherboard, and set it aside to be replaced.
  • Use the plastic opening pick and the Phillips screwdriver to remove the camera from its soldering on the motherboard, and set it aside to be replaced.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Douglas

Member since: 01/28/2015

458 Reputation

4 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 69