Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Battery replacement is a simple replacement for the Pyrus video camera, and the first thing anyone should do before taking the device apart. Check with the troubleshooting page to see if your device battery needs to be replaced.

  1. Turn the video camera upside down so the bottom of the device is visible.
    • Turn the video camera upside down so the bottom of the device is visible.

  2. Pull back the tab to reveal the battery compartment. Pull back the tab to reveal the battery compartment.
    • Pull back the tab to reveal the battery compartment.

  3. Pull back tab that is holding in the battery in place and remove the battery from the device. Pull back tab that is holding in the battery in place and remove the battery from the device.
    • Pull back tab that is holding in the battery in place and remove the battery from the device.

  4. Insert replacement battery.
    • Insert replacement battery.

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 60