Introduction

This guide will be used to replace the propellers. The only tool you will need to use a #0 Phillips head screwdriver.

  1. Make sure that the drone is powered off
    • Make sure that the drone is powered off

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Using #0 Philips head screwdriver, unscrew the four propellers. If screw is stuck in the propeller, turn over and insert the screw driver and pop out the screw. If screw is stuck in the propeller, turn over and insert the screw driver and pop out the screw.
    • Using #0 Philips head screwdriver, unscrew the four propellers.

    • If screw is stuck in the propeller, turn over and insert the screw driver and pop out the screw.

  4. Take the replacement propeller, and align it with the screw point
    • Take the replacement propeller, and align it with the screw point

    • Screw in the new propellers

Conclusion

To reassemble your device, follow these instructions in reverse order.

Serge

Member since: 09/26/2017

319 Reputation

3 Guides authored

Team

USF Tampa, Team S2-G1, Passmore Fall 2017 Member of USF Tampa, Team S2-G1, Passmore Fall 2017

USFT-PASSMORE-F17S2G1

4 Members

3 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 7

Past 30 Days: 34

All Time: 421