Skip to main content

Introduction

Use this guide to disconnect the battery from the your Protocol TerraCopter Evo. You will need to flip your drone upside down then unlock the battery cover by pulling the plastic trigger down and open it then remove it by disconnect it from the drone's cable.

Tools

No tools specified.

Parts

  1. Pull down the battery cover on the bottom of the drone and open it. Pull down the battery cover on the bottom of the drone and open it.
    • Pull down the battery cover on the bottom of the drone and open it.

  2. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  3. Pull the battery out of the battery slot. Disconnect the red battery cable from the device. Disconnect the red battery cable from the device.
    • Pull the battery out of the battery slot.

    • Disconnect the red battery cable from the device.

  4. Remove the battery from the device.
    • Remove the battery from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 7

All Time: 129