Protocol Kaptur GPS Virtual Reality Lens Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

This guide will help you replace your lens if they get scratched or broken.

What you need

1. Step 1 Virtual Reality Lens
  Remove the phone slide from the virtual reality goggles.
  
  Take the outside cover off using the plastic opening tool.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2
  Remove each screw from its place.
  
  Remove four 6mm Phillips head screws.
  
  Remove twelve 7mm Phillips head screws.
  
  Pull out each bracket so you can see the full lens case.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
4. Step 3
  Tool used on this step:
  Tweezers
  $4.99
  
  Buy
  Remove the adjustable lens lever on top of the virtual reality lens.
  
  Using tweezers, you will need to separate the tooth gears and remove them so the lens can fall freely out.
  
  Pull the lens case out from the front of the headset.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
5. Step 4
  With a little force, push the lens from outside in to break the lens out of the case. This will get the lens out.
  
  Now replace the lens with a new one and follow the steps in reverse order to put the lens back!
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 5 other contributors

Austin Fedie

Member since: 02/15/18

168 Reputation

1 Guide authored

Team

UW Stout, Team S8-G6, Ogden Spring 2018 Member of UW Stout, Team S8-G6, Ogden Spring 2018

UWSTOUT-OGDEN-S18S8G6

3 Members

40 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 40

All Time: 640