Introduction

This guide will give detailed steps for replacing a propeller. This guide utilizes the heavy duty spudger tool and the tweezers.

Parts

No parts required.

Use the heavy duty spudger tool to pry off metal caps by pushing the spudger up into the cap. Use the heavy duty spudger tool to pry off metal caps by pushing the spudger up into the cap.
  • Use the heavy duty spudger tool to pry off metal caps by pushing the spudger up into the cap.

Add Comment

Twist the white spindle sleeve counter clockwise to align locking pin inside with the opening.
  • Twist the white spindle sleeve counter clockwise to align locking pin inside with the opening.

Add Comment

Deck the Halls
With tools and Fix Kits
Use tweezers to remove locking pin.
  • Use tweezers to remove locking pin.

Add Comment

Pull off white spindle sleeve.
  • Pull off white spindle sleeve.

  • Take note of which side of the spindle sleeve is the top.

Add Comment

Pull off propeller. Pull off propeller.
  • Pull off propeller.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sergey Borishkevich

Member since: 01/30/2017

101 Reputation

1 Guide authored

Team

UW Tacoma, Team 2-3, Rose Winter 2017 Member of UW Tacoma, Team 2-3, Rose Winter 2017

UWT-ROSE-W17S2G3

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 72