Introduction

This guide is for replacing the rechargeable battery in the Protocol Dronium Two. This repair doesn't require tools. A spare battery is not included in the packaging but can be bought from the Protocol store.

Tools

No tools required.

Parts

Image 1/1:
  • Turn the drone off by moving the selector switch to the left.

Add Comment

Image 1/1: Press down on the camera as shown to get a better grip.
  • On the underside of the drone, gently pull the battery compartment away from the drone.

  • Press down on the camera as shown to get a better grip.

Add Comment

Image 1/2: Image 2/2:
  • If the power cable of the battery is connected to the drone, remove it by gently pulling it out.

Add Comment

Image 1/1:
  • Remove the battery from its compartment by sliding it out away from the drone.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 32