Fix Your Stuff Community Store

Protocol Dronium 3x Controller Battery Replacement

Introduction

The Protocol Dronium 3x remote controller is used to control the drone. The controller uses 4 AA batteries that are accessed on the back side of the controller. The Protocol Dronium 3x can also be controlled via the Protocol app on both the Apple App Store and Google Play Store.

What you need

  1. Protocol Dronium 3x Controller Battery Replacement, Controller Battery: step 1, image 1 of 2 Protocol Dronium 3x Controller Battery Replacement, Controller Battery: step 1, image 2 of 2

    • Ensure the controller is powered off.

    • Using a Phillips #0 screwdriver, unscrew the screw holding the battery lid on the controller. Keep in mind that the screw will be attached to the lid.

    • Remove lid and screw.

    Edit

  3. Protocol Dronium 3x Controller Battery Replacement: step 2, image 1 of 1

    • Remove batteries from battery compartment.

    • Discard the used batteries.

    • Place new batteries in the controller in the correct orientation.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 3 other contributors

Alexander George

Member since: 09/17/18

395 Reputation

4 Guides authored

Badges: 8

+5 more badges

Team

Washington State, Team S29-G7, Hope Fall 2018 Member of Washington State, Team S29-G7, Hope Fall 2018

WSU-HOPE-F18S29G7

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 4

All Time: 157